Abstract
Alkylation of benzene with light alcohols offers opportunities for a more environmental friendly gasoline by removing considerable portions of benzene. The performances of ZSM-5 and mordenite zeolites as catalysts were tested in the alkylation reaction of benzene with different light alcohols (methanol, ethanol and isopropanol). The experiments were carried out in a fluidized-bed reactor with a 1/1 mol ratio of benzene/alcohol at 200, 250, 300, 350 and 400°C for 3, 5, 7, 10, 13, 15 and 20s. The reaction temperature, nature of the alcohol molecule and the BrǾnsted to Lewis acid ratio of the catalysts, play an important role in the alkylation reactions. For benzene alkylation with methanol to toluene and xylene (XY), both mordenite and ZSM-5 are active and selective catalysts, while for benzene ethylation to ethylbenzene (EB), ZSM-5 exhibits higher EB selectivity than mordenite. Isopropanol presents higher difficulty to be activated as compared with other alcohols at the higher temperature, while the lower temperature favors benzene isopropylation to cumene over both catalysts. By studying the alkylation of benzene with alcohols of different chain length, it has been found that as the alkyl size (i.e. methyl, ethyl, and propyl) increases, the optimum temperature for alkylation reaction decreases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.