Abstract
ABSTRACT Spiral separators and dense-medium cyclones (DMCs) are widely used for separation of −1 + 0.125 mm fine coal. In this study, testing was carried out using −1 + 0.125 mm fine coal with low near density material to produce a concentrate, using both a spiral and DMC. Clean coal with 8.31% ash content was obtained with the spiral at 37.39% yield, 47.76% combustible recovery and 0.150 Ep value. For the DMC, the combustible recovery of clean coal at the ash of 8.31% ash was improved to 80.84% at 62.98% yield, and 0.118 Ep value. The advantage of the DMC is further proved by analysis using Fuerstenau upgrading curves.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Coal Preparation and Utilization
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
