Abstract
Reverse osmosis (RO) is a water purification process that uses a semi-permeable membrane to remove ions from potable water. It has high rejection throughput, low energy consumption, and negligible pollution load when compared to conventional treatment methods. Comparative percentage salt rejection (SR) efficiency for surrogates of cesium and molybdenum was performed using commercially available membranes. Polyamide, polysulfone, polyamide–polysulfone composite, and cellulose acetate were subjected to various operating conditions in a domestically developed high-pressure membrane test cell. Five different concentrations of surrogate salts ranging from 100 to 500 ppm and varied pressures of 15–17 kg/cm2 combined with varying temperatures of the feed solution from 25°C to 45°C were used in this experimental work. It was found that the %SR efficiency of these membranes increased with the increase in salt concentration and feed temperature. However, a significant decrease in SR was observed with increasing pressure. A comparative study of these commercially available RO membranes was also performed against short-lived radioisotope Technetium-99m, and was determined by activity counts of feed and filtered samples using a well counter. The results suggest that the rejection efficiency was found to be highest in the case of polyamide–polysulfone composite, followed by polysulfone, polyamide, and cellulose acetate.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
