Comparative Analysis on Quality and Bread-making Properties by Particle Size of Dry-Milled Rice Flours of Rice Varieties

Abstract

This study was conducted the comparative analysis on quality and rice bread process suitability properties by four particle size classification of dry-milled flours for four rice varieties. Dry-milled rice flours were prepared by dry milling and classified according to particle size using 100, 150, 200, and 250 mesh sieves. The mean particle size by four particle size classification of 60 ~ 100 mesh, 100 ~ 150 mesh, 150 ~ 200 mesh, 200 ~ 250 mesh exhibited 118.9 μm, 87.4 μm, 65.3 μm, 46.1 μm, respectively. The particle size of dry-milled rice flours was the finer, the damaged starch content was the higher (r = − 0.570*). The particle size also had significant negative correlation with the water absorption index (r = − 0.533*, r = − 0.593*), and water solubility index (r = − 0.857**, r = − 0.584*). Dry-milled rice flours with particle size of 60 ~ 70 μm, passed through 150 and 200 mesh sieves exhibited the highest specific volume of rice bread. Whereas, the dry-milled rice flour with finer particle size above 200 mesh showed the lowest specific volume of rice bread. These results will be applied as a quality standard to aid in the selection of the most suitable dry-milled rice flour for baking.