Abstract
Journal of the American Ceramic SocietyVolume 90, Issue 9 p. 3017-3018 Comment on “Viscosity Measurement by Cylindrical Compression for Numerical Modeling of Precision Lens Molding Process” by A. Jain, G. C. Firestone, and A. Y. Yi Frank Richter, Corresponding Author Frank Richter Institute of Materials Science and Technology: Vitreous Materials, University of Technology of Berlin, 10587 Berlin, Germany ‡Present address: Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany.†Author to whom correspondence should be addressed. e-mail: Frank.Richter@ruhr-uni-bochum.deSearch for more papers by this authorHans-Juergen Hoffmann, Hans-Juergen Hoffmann Institute of Materials Science and Technology: Vitreous Materials, University of Technology of Berlin, 10587 Berlin, GermanySearch for more papers by this author Frank Richter, Corresponding Author Frank Richter Institute of Materials Science and Technology: Vitreous Materials, University of Technology of Berlin, 10587 Berlin, Germany ‡Present address: Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany.†Author to whom correspondence should be addressed. e-mail: Frank.Richter@ruhr-uni-bochum.deSearch for more papers by this authorHans-Juergen Hoffmann, Hans-Juergen Hoffmann Institute of Materials Science and Technology: Vitreous Materials, University of Technology of Berlin, 10587 Berlin, GermanySearch for more papers by this author First published: 26 September 2006 https://doi.org/10.1111/j.1551-2916.2006.01292.xCitations: 1 Based in part on the Ph.D. thesis submitted by F. Richter for the degree of “Doktor der Ingenieurwissenschaften” in materials science, University of Technology of Berlin, Germany, 2006. Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article.Citing Literature Volume90, Issue9September 2007Pages 3017-3018 RelatedInformation
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
