Abstract
The biodiesel as a replacement source to fossil fuel is able to minimize the dependence on petroleum products as well as control the pollution issues. These biofuel produced from the different sources and also it is directly used for the engine it will not fully burn and it produces increased exhaust emission level. In this research, 20% of neochloris oleoabundans algae oil (B20) blended with neat diesel fuel along with cerium oxide (CeO2) nanoparticle was used in the dosage of 25 ppm, 50 ppm, 75 ppm and 100 ppm. This research was performed in a single cylinder air cooled engine connected with electrical dynamometer without having engine alteration and also the injection pressure and timings are maintained at the original standard suitable for the engine. The energy of cerium oxide blend with the biodiesel increased the combustion properties in the engine, and results in decreased carbon deposits in the cylinder wall.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.