Combination of non-thermal plasma and heterogeneous catalysis for methane and hexadecane co-cracking: Effect of voltage and catalyst configuration

Abstract

Co-cracking of methane and n-hexadecane is investigated over Mo–Ni/Al2O3 catalyst in a packed bed dielectric barrier discharge (DBD) plasma reactor. The effects of applied voltage and plasma-catalyst configuration are experimentally studied in terms of process energy efficiency and product composition. Hydrogen and gaseous hydrocarbon (methane, C2, C3 and C4 components) are obtained as the cracking product. Results show that combination of catalyst and plasma improves energy efficiency of hydrocarbons plasma conversion. The applied voltage has dominant effect on the catalytic-plasma cracking process and in-plasma catalysis configuration is more efficient compared with post-plasma catalysis. The highest energy efficiency is achieved the value of 194.44l/kWh for in-plasma configuration under highest applied voltage condition (11kV). In these conditions, the production rate and mole percent of hydrogen are obtained 107.66ml/min and 63.7%, respectively. The effect of catalyst deactivation is also investigated on the process variables.