Co–B nanoparticles supported on carbon film synthesized by pulsed laser deposition for hydrolysis of ammonia borane

Abstract

Thin films of Carbon-supported Co–B nanoparticles were synthesized by using Pulsed Laser Deposition (PLD) and used as catalysts in the hydrolysis of Ammonia Borane (AB) to produce molecular hydrogen. Amorphous Co–B-based catalyst powders, produced by chemical reduction of cobalt salts, were used as target material for nanoparticles-assembled Co–B film catalysts preparation through PLD. Various Ar pressures (10–50 Pa) were used during deposition of carbon films to obtain extremely irregular and porous carbon support with high surface area prior to Co–B film deposition. Surface morphology of the catalyst films was studied using Scanning Electron Microscopy, while structural characterization was carried out using X-Ray diffraction. The hydrogen generation rate attained by carbon-supported Co–B catalyst film is significantly higher as compared to unsupported Co–B film and conventional Co–B powder. Almost complete conversion (95%) of AB was obtained at room temperature by using present film catalyst. Morphological analysis showed that the Co–B nanoparticles produced after the laser ablation process act as active catalytic centers for hydrolysis while the carbon support provides high initial surface area for the Co–B nanoparticles with better dispersion and tolerance against aggregation. The efficient nature of our carbon-supported Co–B film is well supported by the obtained very low activation energy (∼29 kJ (mol)−1) and exceptionally high H2 generation rate (13.5 L H2 min−1 (g of Co)−1) by the hydrolysis of AB.