Abstract
Slow pyrolysis studies of palm kernel cake (PKC) and cassava pulp residue (CPR) were conducted in a fixed-bed reactor. Maximum liquid yield (54.3 wt%) was obtained from PKC pyrolysis at 700 °C, heating rate of 20 °C/min, N2 gas flow rate of 200 cm3/min and particle size of 2.03 mm. Fuel properties of bi-oils were in following ranges: density, 1.01–1.16 g/cm3; pH, 2.8–5.6; flash point, 74–110 °C and heating value, 15 MJ/kg for CPR oil and 40 MJ/kg for PKC oil. PKC oil gave main contents of n-C8–C18 carboxylic acids, phenols, and esters, whereas CPR oil gave the highest amount of methanol soluble fraction consisting of polar and non-volatile compounds. On gas compositions, CPR pyrolysis gave the highest yield of syngas produced, while PKC pyrolysis offered the highest content of CO2. Pyrolysis chars possessed high calorific values in range from 29–35 MJ/kg with PKC char showing a characteristic of reasonably high porosity material.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
