Characterization of heated volume generation by nanosecond pulsed plasma actuator with various pressure environments

Abstract

Nanosecond dielectric barrier discharge (NS-DBD) has emerged as a promising technique for controlling high-speed flows, generating a heated volume that generates strong density and viscosity gradients, thereby perturbing flow dynamics. Since its potential application in low-pressure, high-speed flows, understanding how the size and growth of the heated volume correlate with surrounding pressure is crucial. In this study, we employed typical schlieren and background-oriented schlieren (BOS) techniques to investigate the heated volume’s sensitivity to surrounding pressure in quiescent air. The observed heated volume’s size variations with surrounding pressure likely stemmed from the increase in thermal diffusivity at lower pressures. BOS findings unveiled a nearly linear decrease in heated volume’s core density with energy input. Meanwhile, the heated volume’s size augmented with energy input but exhibited gradual saturation, attributable possibly to shear stresses impeding volume expansion as temperature and viscosity rose, or to consumption of energy in vibration excitation and other reactions. In the cases of 100 and 50 kPa, the sensitivity of the heated volume’s size to the reduced electric field appeared to be similar. However, at 10 kPa, where the reduced electric field is higher compared to that of the 100 and 50 kPa cases due to the lower air density, the size sensitivity drastically decreased. This suggested a transition in discharge mode from filamentary to diffusive behavior at lower pressures.