Abstract
In this work, the physical properties of iron sulfide (FeS2) thin films deposited by the chemical spray-pyrolysis (CSP) technique were studied. The thin films are deposited on glass substrates at 200oC, using FeCl3 salt with thiourea (NH2)2CS as precursors. Structural analysis of X-Ray diffraction manifested that the thin films contain two phases: Marcasite and Pyrite in planes (110), (111) at angles 2θ =26.3°, 2θ =28.3° respectively. Optical properties analysis showed that the prepared iron sulfide thin-films were highly absorbing in the UV-Visible range and the absorption coefficient was in the range of 1.6x105 cm-1 with a relatively low resistivity of about 0.49 (Ω.cm). The calculated activation energy (Ea) was 0.024 eV and the bandgap value was 2.45 eV. Moreover, the FeS2 thin films were also deposited on (CdO) to fabricate a heterojunction photocell. In conclusion, there is the feasibility of preparing low-cost and highly absorbing iron sulfide (FeS2) thin films for optoelectronic applications with acceptable homogeneity using the spray-pyrolysis technique.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
