Abstract
The characteristics of HfO2 films grown on Si substrates using a tetrakis-diethyl-amino-hafnium precursor by the remote plasma atomic layer deposition (RPALD) and direct plasma ALD (DPALD) methods were investigated by physical and electrical measurement techniques. The as-deposited HfO2 layer from RPALD exhibits an amorphous structure, while the HfO2 layer from DPALD exhibits a clearly visible polycrystalline structure. Medium energy ion scattering measurement results indicate that the interfacial layer consists of the interfacial SiO2−x and silicate layers. These results suggested that the stoichiometric change in the depth direction could be related to the energetic reactant in a state of plasma used in the plasma ALD process, resulting in damage to the Si surface and interactions between Hf and SiO2−x. The as-deposited HfO2 films using RPALD have the better interfacial layer characteristics than those using DPALD. A metal-oxide-semiconductor capacitor fabricated using the RPALD method exhibits electrical characteristics such as equivalent oxide thickness (EOT) of 1.8 nm with an effective fixed oxide charge density (Qf,eff) of ∼4.2×1011q∕cm2 and that for DPALD has a EOT (2.0 nm), and Qf,eff(∼−1.2×1013q∕cm2).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.