Abstract
Cost-effective membrane fouling control and nitrogen removal performance are of great concern in airlift external circulation membrane bioreactors (AEC-MBRs). Computational fluid dynamics (CFD) model incorporating sub-models of bio-kinetics, oxygen transfer and sludge rheology was developed for the cost-effective optimization of a lab-scale AEC-MBR. The model was calibrated and validated by extensive measurements of water velocities and water quality parameters in the AEC-MBR. The validated results demonstrated that the optimized height of gas-liquid dispersion was at around 300mm. The shear stress on membrane surface was equalized and had an average value of 1.2Pa under an air flowrate of 1.0m3h−1. The model further revealed that the high nitrogen removal efficiency (>90%) was achieved due to the high recirculation ratio driven by airlift force without destroying the oxygen deprivation and enrichment in the anoxic and oxic zone, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
