Abstract
Abstract Different kinds of catalysts have a great influence on the characteristics and products of the biomass catalytic pyrolysis. Catalysts of Cu/C, Pd/C, Pd Ag and H-Zeolites socony mobil #5 (HZSM-5) were selected and characterized by the X-ray diffraction (XRD) and field-emission scanning electron microscope (FE-SEM). Decomposition behaviors of the larch catalytic pyrolysis were studied by the thermogravimetric analyzer (TG). The total carboxylic acids (TCAs) and total phenolic compounds (TPCs) in bio-oil were determined using the non-aqueous potentiometric titration method. The chemical distribution of bio-oil was investigated by the gas chromatography/mass spectrometry (GC/MS). Results showed that the temperature of the maximum weight loss rate of larch was decreased by adding these four catalysts. The carbon residue rate was increased by using HZSM-5. The content of GC-detected phenols increased from 25.28% to 35.11% (area) by adding Pd/C. However, TCAs in bio-oil were decreased sharply with Pd Ag and Pd/C. HZSM-5 promoted the formation of phenols and enhanced TPCs in bio-oils (26.56 wt%), which increased by approximately 35% compared to that from the non-catalytic pyrolysis process. This phenol-rich bio-oil can be used to replace the traditional phenol for the manufacturing of high-value biomaterials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
