Abstract
Recently, bio-based carbon foams have gained much interest in many chemical industry fields because of their unique structure and properties. This study provides new information on the effects of catalytic metals (iron, nickel, and copper) on the foaming process. Specifically, the effects of these catalysts on the density, foam growth, and cell size and then further on the pore size distribution and specific surface areas after the physical activation are considered. Furthermore, some of the activated sugar foams were used in adsorption tests using methylene blue as adsorbent. Results showed that the highest effect on foam density was obtained using the iron catalyst in the foaming process. In addition, increasing the iron amount, the development of micro-pores decreased from 95.2 to 60.3% after cabonization and activation of the foams. Nickel and iron had the highest and lowest effect on foam rise at 1375 and 500%, respectively. Interestingly, when the nickel catalyst was used, cell sizes and surface areas two times larger than those when the foams were prepared with the iron and copper catalysts was obtained. The specific surface area of activated sugar-based carbon foams changed significantly with the increased copper amount inside the foaming solution in compared with iron or nickel catalyst. Methylene blue adsorption capacity of additional series of activated sugar foams decreased from 28 to 9% when meso-pore amount decreased.
Highlights
Activated carbons (ACs) are used for many applications in industrial and municipal processes, including wastewater treatment, gas cleaning processes, and metal removal from waste streams [1–3]
ACs have been prepared from a number of carbon-rich materials, such as coconut shells, coal, and sawdust [2, 7, 8]
The aim of this article is to investigate the impact of different metal-based catalysts used in different concentrations in the formulation of sugar foams on the physical properties such as specific surface area, pore development, cell sizes and densities on the activated sugar forms
Summary
Activated carbons (ACs) are used for many applications in industrial and municipal processes, including wastewater treatment, gas cleaning processes, and metal removal from waste streams [1–3]. ACs have been used as support for a heterogeneous catalyst or as a catalyst itself [4–6]. The consumption of AC is continuously increasing worldwide. ACs have been prepared from a number of carbon-rich materials, such as coconut shells, coal, and sawdust [2, 7, 8]. Structured carbons or carbon foams are a type of carbons that have recently gained much interest. These carbon structures have been used in different applications, such as
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
