Catalytic combustion of ethyl acetate and nano-structural changes of ruthenium catalysts supported on tin oxide

Abstract

Correlation between the catalytic activity and the nano-structure of ruthenium catalyst supported on tin oxide was investigated. As-calcined Ru/SnO2 catalyst exhibited high catalytic activity for ethyl acetate combustion despite its low surface area of ca. 5.0m2g−1. The catalytic activity was degraded by the reduction treatment at 400°C, whereas it was partially restored by the subsequent reoxidation treatment at 400°C. To elucidate the variation in the catalytic activity, the ruthenium catalysts heat-treated under reductive or oxidative condition were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). In the as-calcined catalyst, it was revealed that the fine particles with the small contact angles were well-dispersed on the surface of tin oxide support. In the deactivated catalyst treated at 400°C under a reductive atmosphere, the large particles of intermetallic compounds with the core–shell structure were clearly observed. On the other hand, upon the reoxidation treatment at 400°C the particles with the core–shell structure disappeared accompanied with the appearance of the nano-sized particles. Accordingly, it was clarified that the catalytic activity was strongly influenced by the structural changes of active sites such as sintering and redispersion.