Abstract
Groundwater inflow into tunnels can constitute a potential hazard and also is an important factor influencing the speed of tunnel excavation. In this paper the results of numerical modelling are presented to investigate the groundwater flow and the distribution of the pore pressure around tunnels. Two types of tunnels, double-arch tunnel and twin-tube tunnel, were studied. Potential leakage places are identified for the two types of tunnels. The most permeable place in the double-arch tunnel is at the contact interface between the middle wall and the overlying rock. The results of numerical modelling are compared with field observations in the case studies. Based on the results of numerical modelling and the field investigations, an innovative water-gathering system for reducing water leakage was proposed and applied in some tunnels on ChangJi Expressway in China. The water-gathering system can be quickly glued to the rock surface and easily installed for tunnelling. It can be applied in tunnels where water-bearing fractures are well-developed in the rock mass.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
