Abstract
The camera viewfinder would consist of a two-element objective lens, a field stop, a tilted concave mirror, an aperture stop, a second tilted concave mirror, and a two-element eyepiece. This forms a Z shaped configuration with the mirrors at the corners of the Z. The two mirrors, with the aperture stop midway between them, form a 1:1 telescopic erecting relay system. Two types of mirrors are studied: spherical and parabolic. The main problems encountered in the spherical mirror system are axial astigmatism and field tilt, both caused by the tilted mirrors. By using confocal, coaxial, decentered parabolic mirrors, with the aperture stop at the common focal point, the axial astigmatism can be eliminated; however, the field tilt problem is aggravated. By rotating the axis of the second parabolic mirror about the common focal point, the field tilt can be minimized, and the astigmatism in all beams eliminated. This last configuration is, however, plagued by distortion and coma. We conclude that none of these systems is satisfactory for image quality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.