Calculation of the components of the temperature measurement error by a resistance thermocouple of an installed unbalanced bridge

Abstract

The article has devoted to solving an urgent problem related to the determination and calculation of the components of the temperature measurement error. A grain drying machine had selected as the object of research, in which the temperature of the grain at the exit from the machine is measured with the help of a Cu50 resistance thermocouple installed in an unbalanced bridge. It had found that the scale of the measuring device, calibrated in degrees Celsius, will have a nonlinearity error, which increases towards the end of the measurement range. For the Cu50 resistance thermocouple installed in the grain drying machine, when measuring the temperature in the range of 0 … 100 °C in absolute terms, the nonlinearity error was 0.3 mA, in relative terms - 4.4 %, which is quite large. The measurement error has calculated with a tolerance for the nominal resistance of the thermistor ± 0.1 Ohm, which in the given form was 0.5%. The resulting value indicates that this component will have an insignificant effect on the total measurement error. The measurement error due to the supply voltage drop by 0.2 V in relative form was 4.2 %. Thus, the voltage drops when using an unbalanced bridge will have a significant effect on the measurement result.