Abstract
The study described in this paper involved a close examination of one of the least-researched cement phases, 4CaO•Al(2)O(3)•Fe(2)O(3) (C(4)AF or ferrite). The two ferrite materials used in this program were: (1) extracted from an industrial clinker free of 3CaO•Al(2)O(3) (C(3)A or aluminate); and (2) a laboratory-synthesized C(4)AF compound. Both ferrite materials were initially characterized using optical microscopy, x-ray diffraction (XRD), and Raman spectroscopy. The hydration kinetics and reactivity of both materials were studied with a calorimetric technique. Similar to aluminate, ferrite also demonstrated a strong early hydration rate. An adequate amount of sulfate (SO(3)) was needed to regulate the ferrite hydration rate. Based on this work, an equivalent aluminate content, C(3)A(eq), is proposed. The hydration of C(3)A(eq) needs to be properly controlled with the appropriate amount of sulfate. The concept, based on equivalent aluminate content for cement sulfate optimization, ensures proper early hydration behavior from both C(3)A and C(4)AF and avoids potential cement-admixture incompatibility probems, especially for the cements containing little or no C(3)A content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.