Abstract
To study the bond behavior and the force transference of FRP plates adhered to masonry. In this paper, experiments of anchorage strength of FRP attached to masonry are done, a 100KN capacity hydraulic jack activated by a manual pump was used to load the specimen. The tensile strength was measured by using a loading transducer, and strain gauges were mounted directly onto the surface of the FRP composite to measure the strain during application of load. Besides the strain and bond stress development and distribution under every grade of loading were studied. Test results show that the maximum local bond stress is not influenced by the FRP bond length, instead it increases with masonry strength. At the same time, the local bond stress--slip curve is obtained. Based on the test results, two new bond stress-slip constitutive models between FRP and masonry were proposed and they turned out to be good matches to the experimental results, which indicate its valuable references for the corresponding codes and engineering applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
