Bipolar resistive switching properties of Ti-CuO/(hexafluoro-hexa-peri-hexabenzocoronene)-Cu hybrid interface device: Influence of electronic nature of organic layer

Abstract

This study reports the change in the structural and junction properties of Ti-CuO-Cu structure on incorporation of a 2-dimensional (2D) organic layer comprising of n-type hexafluoro-hexa-peri-hexabenzocoronene (6F-HBC). A bipolar resistive switching is observed in the device having interface between sputter deposited copper oxide (CuO) and vacuum sublimated 6F-HBC hybrid interface. The CuO/6F-HBC hybrid interface exhibits rectifying I-V characteristics in complete contrast to the ohmic and rectifying characteristics of junctions based on individual 6F-HBC and CuO layers. Large change in resistive switching property from unipolar resistive switching in CuO/HBC to bipolar resistive switching in CuO/6F-HBC interface was observed. At the CuO/6F-HBC interface, C1s peak corresponding to fluorinated carbon is shifted by 0.68 eV towards higher binding energy (BE) side and O1s peak due to non-lattice oxygen is shifted by 0.6 eV towards lower BE, confirming the interaction of O2− ion in CuO with fluorinated carbon atoms in 6F-HBC at the hybrid interface. Correlation between conductive atomic force microscopy images and atomic force microscopy topography images, I-V characteristics in conducting, non-conducting, and pristine regions along with x-ray photoelectron spectroscopy results establishes the important role of hybrid interface to determining the resistive switching properties. This study demonstrates that the resistive switching and interface properties of a hybrid device based on inorganic and organic 2D materials can be modified by changing the electronic properties of organic layer by attaching suitable functional groups.