Abstract
Integrated biomechanical and engineering assessments were used to determine how humans responded to variations in turf during running and turning. Ground reaction force (AMTI, 960 Hz) and kinematic data (Vicon Peak Motus, 120 Hz) were collected from eight participants during running (3.83 m/s) and turning (10 trials per condition) on three natural turf surfaces in the laboratory. Surface hardness (Clegg hammer) and shear strength (cruciform shear vane) were measured before and after participant testing. Peak loading rate during running was significantly higher (p < .05) on the least hard surface (sandy; 101.48 BW/s ± 23.3) compared with clay (84.67 BW/s ± 22.9). There were no significant differences in running kinematics. Compared with the "medium" condition, fifth MTP impact velocities during turning were significantly (RM-ANOVA, p < .05) lower on clay (resultant: 2.30 m/s [± 0.68] compared with 2.64 m/s [± 0.70]), which was significantly (p < .05) harder "after" and had the greatest shear strength both "before" and "after" participant testing. This unique finding suggests that further study of foot impact velocities are important to increase understanding of overuse injury mechanisms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
