Abstract

Apoglucose oxidase was reconstituted onto a pyrroloquinoline quinone and flavin adenine dinucleotide phosphate, PQQ–FAD, monolayer associated with a rough Au electrode to yield a bioelectrocatalytically active glucose oxidase, GOx. Electrically contacted PQQ–FAD/GOx monolayer was applied to the biocatalytic oxidation of glucose. A microperoxidase-11, MP-11, monolayer was assembled onto a rough Au electrode and used for the biocatalytic reduction of H2O2. Both biocatalytic electrodes, Au/PQQ–FAD/GOx and Au/MP-11, were assembled into a biofuel cell using glucose and H2O2 as the fuel substrate and the oxidizer, respectively. The biofuel cell generates an open-circuit voltage, Voc, of ca. 310 mV and a short-circuit current density, isc, of ca. 114 µA cm–2. The maximum electrical power, Pmax, extracted from the cell is 32 µW at an external optimal load of 3 kΩ. The fill factor of the biofuel cell, f = PmaxIsc–1Voc–1, is ca. 25%.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.