Abstract
Abstract Biodiesel production from the esterification of stearic acid with ethanol catalyzed by the mesoporous ZrO2/SiO2 catalysts which successfully synthesized by surfactant-assisted sol-gel auto-combustion method. These catalysts were characterized by various physico-chemical techniques such as XRD, BET surface area measurement, HR-TEM and NH3-TPD. The mesoporous catalyst prepared with cationic surfactant (ZrSiOC) showed a maximum BET surface area and pore volume. Interestingly, the ZrSiOC catalyst exhibited the largest acidity value among all catalysts. The results showed that the mesoporous ZrO2/SiO2 catalysts prepared with cationic (ZrSiOC) and non-ionic (ZrSiOT) surfactants demonstrated higher stearic acid conversion than those with anionic (ZrSiOS) or without surfactant (ZrSiO). Significantly, the ZrSiOC and ZrSiOT catalysts exhibited the highest conversion of 69.2% and 63.1% at 120 °C after 3 h, respectively. Additionally, it was observed that the conversion increased extremely with increasing the reaction temperature giving a maximum conversion of 76.9% at 125 °C by using the most active catalyst (ZrSiOC). Interestingly, the ZrSiOC catalyst displays suitable recycling as it kept performance of 72.5% after five recycle runs without significant lack in performance. Moreover, the kinetic study confirmed that esterification follows pseudo first-order equation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
