Abstract
In order to optimise the utilisation of material properties, simplify the construction process and enhance the industrialisation of steel reinforced concrete beams, an innovative prestressed steel reinforced concrete composite beams(PSRCC) was proposed, which was achieved by integrating prestressing technology and prefabricated technology to steel reinforced concrete structure. To investigate the shear PSRCC deep beams, a static load test was conducted on 7 PSRCC deep beams. The study investigated the effects of parameters such as shear span-depth ratio, prestressed tendons degree, form, height and application sequence on the failure mode, crack pattern, load-displacement behavior, strain response and damage evolution. A model was established to predict the shear strength of PSRCC deep beams, considering the steel-concrete interaction, using the von Mises yield criterion and the SST model, which assessed the contributions of composite strut, prestressed tendons and shear steel web for shear strength. The test results showed that the prefabricated and cast-in-situ concrete components maintained good integrity, and PSRCC deep beams eventually experienced typical diagonal compression failure. Applying prestressing and reducing the shear span-depth ratio under identical conditions would reduce the deformation capacity of PSRCC deep beams. When the shear span-depth ratio was reduced from 1.0 to 0.5, the cracking load and peak load of the specimens increased by 17.31 % and 16.53 % respectively. Increasing the prestress level from 0 to 0.3 and 0.6 increased the cracking load of the specimens by 1.41 and 2.36 times, respectively, but the peak load of the specimens increased by only 3.37 % and 8.17 %. The cracking load of the parabolic tendon specimen increased by 2.18 for the comparison specimen but was 8.33 % lower than that of the linear tendon specimen with the same degree of prestressing. Comparison of the two prestressing sequences showed that the cracking load of the specimen with tensioning prestressed tendons after pouring the entire beam section increased by 29.84 %, but the peak load increased by only 3.11 %. As the height of the prestres tendons increased, the cracking and peak loads of the specimen reduced by 5.84 % and 5.71 % respectively. Consequently, the shear strength of PSRCC deep beams was significantly influenced by the shear span-depth ratio and minimally affected by prestress-related parameters. The proposed model accurately predicted the shear strength of PSRCC deep beams compared to existing codes, offering valuable guidance for design.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
