Bed stability and maximum solids capacity in a Gas–Solid Vortex Reactor: Experimental study

Abstract

A Gas–Solid Vortex Reactor (GSVR), in literature also referred to as Rotating Fluidized Bed in Static Geometry (RFB-SG), is a promising reactor type for Process Intensification (PI) with respect to reactor volume reduction. Although replacing gravitational by centrifugal force has been considered since the seventies, the hydrodynamics of the reactor flow and the bed behavior remain largely unknown. In the present work experiments have been carried out in a cold flow GSVR with diameter of 0.54m, length of 0.1m and 36 inlet slots of 2mm. Gas injection velocities of 55–111m/s and particles with densities of 950–1800kg/m3 and diameters of 1–2mm have been applied. Depending on solids density, particle diameter and gas injection velocity the bed behavior can be considered as stable, semi-stable or unstable. For semi-stable and stable flow regimes the effect of the above process conditions on the maximum solids capacity was investigated. With increasing solids density, the bed stability considerably decreases, while the maximum solids capacity increases. By increasing the gas injection velocity, both the bed stability and the maximum solids capacity increase. Once bed stability is accomplished, a further increase of the gas injection velocity does not affect the maximum solids capacity. With increasing particle diameter, the bed stability decreases while the maximum solids capacity increases.