Abstract
ABSTRACTA series of microcellular poly(ether imide) (PEI) foams and nanocellular carboxylated multiwalled carbon nanotube (MWCNT‐COOH)/PEI foams were prepared by the batch foaming method. MWCNT‐COOHs with different aspect ratios were introduced into the PEI matrix as heterogeneous nucleation agents to improve the cell morphology of the microcellular PEI foams. The effect of the aspect ratio of the MWCNT‐COOHs on the cellular morphology, and gas diffusion is discussed. The results show that with the addition of MWCNT‐COOH, the sorption curve showed a slight reduction of carbon dioxide solubility, but the gas diffusion rate could be improved. The proper aspect ratio of MWCNT‐COOH could improve the cellular morphology under the same foaming conditions, in which m‐MWCNT‐COOH (aspect ratio ≈ 1333) was the best heterogeneous nucleation agent. When the foaming temperature was 170°C, the cell size and cell density of nanocellular m‐MWCNT‐COOH reduced to 180 nm and increased to 1.58 × 1013 cells/cm3, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42325.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
