Abstract

Autothermal reforming of methane (ATR) was studied over Rh catalysts supported on Ce 0.5Zr 0.5O 2 solid solution, which were synthesized by four different routes, including reverse micro-emulsion (ME), co-precipitation (CP), urea-combustion (UC) and sol–gel (SG) method. The textural and structural properties of the as-prepared solid solutions were carefully examined by means of BET, TEM, XRD and Raman techniques. Results showed that the ME sample exhibited a single cubic phase, whereas tetragonal or mixed phases such as cubic CeO 2-rich and tetragonal ZrO 2-rich phases, were found in the case of CP, UC and SG. Vegard's rule revealed that the homogeneity of these as-prepared solid solutions followed the order of ME > CP > UC > SG. TPR and CO-pulse experiments were adopted to evaluate the reducibility and the oxygen storage capacity (OSC) of the catalysts. It was found that the more homogenous the solid solution is, the more reducibility it is, i.e. both the reducibility and OSC followed the same order as that of homogeneity. Rh/ME showed the highest activity and H 2/CO ratio and such performance was maintained without significant loss during 10 h experiment. On the contrary, the other three catalysts having mixed phases showed remarkably deactivation in terms of H 2/CO due to the loss of BET area. To elucidate the resistance toward carbon formation of these catalysts, methane decomposition experiments and following temperature-programmed-oxidation (TPO) were studied. As expected, the resistance toward carbon formation could be enhanced by the improved OSC of the catalyst.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.