Abstract
The solder joint performance of Sn–3.5Ag/Cu combination was studied under multiple reflows, thermal cycling and exposure to the corrosive environment. Factorial experiment was carried out to assess the effect of individual parameters and the interaction of parameters on the shear strength of the solder joint. The results showed that the combination of thermal cycling and immersion in corrosive media resulted in the maximum decrease in the shear strength followed by the combination of multiple reflows and corrosive media. The shear strength reduced with the increase in immersion duration in corrosion medium. Factorial experiment was analyzed using analyis of variance (ANOVA). The results indicated that the individual parameters had a significant effect, whereas the effect of interaction of these parameters was less significant on the performance of the solder joint. Fracture surface indicated mixed mode of failure and the occurrence of fracture predominantly in the bulk solder.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
