Assessment of radiological hazards of naturally occurring radioactive materials in cement industry

Abstract

A study on the radiological hazard in Portland cement due to the presence of naturally occurring radioactive materials is being carried out. The Portland cement manufactured in the Islamabad/Rawalpindi region of Pakistan, intermediate products (clinker) and the various raw materials which compose the product have been analysed for (226)Ra, (232)Th and (40)K using a gamma spectrometry system with a N-type high-purity germanium detector of 80 % relative efficiency. From the measured gamma ray spectra, specific activities were determined. The mean values of the total specific activity of (226)Ra, (232)Th and (40)K are 34.2±11.9, 29.1±3.6 and 295.1±66.9 Bq kg(-1), respectively in Portland cement, 28.4±8.7, 11.3±1.7 and 63.1±17.3 Bq kg(-1), respectively in lime stone, 8.2±1.9, 16.2±3.9 and 187.7±53.2 Bq kg(-1), respectively in gypsum, 34.7±13.1, 41.2±6.7 and 187.6±17.2 Bq kg(-1), respectively in clay, 41.1±11.8, 39.3±6.9 and 195.1±29.2 Bq kg(-1), respectively in latrite and 51.1±18.2, 23.2±1.2 and 258.4±15.3 Bq kg(-1), respectively in clinker. The radium equivalent activities (Ra(eq)), external hazard index (H(ex)), internal hazard index (H(in)), absorbed dose rate in air (D) and annual effective dose rate (E(eff)) were also determined. The measured activity concentrations for these radio nuclides and radiological indices were compared with the reported national and international data. All these measured values are comparable with the worldwide data reported in UNSCEAR publications.