Abstract

The impact of the industrial effluents from Odogunyan industrial estate on the environment was assessed by determination of some physicochemical characteristics of the effluent samples and comparison with discharged standards to ascertain the efficiency of industries’ wastewater treatment process. The physicochemical parameters were evaluated by conventional methods while heavy metals in the effluent samples were analyzed using Atomic Absorption Spectrophotometer (AAS). The results for all the effluents revealed that temperature was in the range of 32- 35 ; Biochemical Oxygen Demand (BOD) 43-86.7 mg/L; Chemical Oxygen Demand (COD) 492-888 mg/L; Total Dissolved Solids (TDS) 1667-13333 mg/L; Total Suspended Solids (TSS) 350-1000 mg/L; Total Solids (TS) 3350-14333 mg/L; Electrical Conductivity 166.5-12390 μS/cm; Total Acidity (TA) 12-60 mg/L and total hardness 24-56 mg/L. The AAS analysis results showed the average metal levels in mg/L as 0.7-1.15, 0.05-0.44, 2.0-45.0, 0.01 and 0.03-0.17 for Zn, Cu, Fe, Cd and Cr respectively. Thus, there is a need for proper remedial measures of the effluents before their discharge into the water bodies.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.