Abstract
Contamination of water and sediments by trace metal elements constitutes a risk to water, living species and for human health. The objective of this study is to assess the level of contamination of water and sediments in the Divo mining area with trace elements. Trace elements (CN and Hg) were determined in water and sediments using an Inductive Coupled Plasma Atomic Emission Spectrometer (ICP-AES). The intensity of sediment contamination was estimated from the calculation of several indices, including the Contamination Factor (FC), the Modified Contamination Degree (DCm) and the Sediment Pollution Index (SPI). The results of the monitoring of the seasonal evolution of TME (CN and Hg), during the months of September 2018 and February 2020 are as follows: In surface water, the metallic concentrations vary from 0 to 4. 98 μg/L for mercury and 0 to 95 μg/l for cyanide. All surface water samples have mercury concentrations lower than the average reference concentration of 6 μg/L. 7% of surface water samples have cyanide concentrations above the average concentration of 70 μg/L. Concerning groundwater, the cyanide concentrations remained below the standards for drinking water over the two seasons. Mercury recorded high concentrations in wells in the department. The sediments were found to be polluted with CN (uncontaminated to low contamination/very heavily contaminated) and Hg (uncontaminated to moderately contaminated/very heavily contaminated). The IPS values show that the surface sediments are moderately polluted except at the HR6 stations (0.07); ZR3 (0.22); AR1 (1.15); R3 (0.96); BRR (0); DRV (0.07) where the sediments are healthy. The inhabitants of mining areas are exposed to the risk of contracting various diseases by consuming this water contaminated with these trace elements.
Highlights
Extractive industries are essential for the development of national economies
Few studies have been conducted on potential contamination of hydrosystems by the use of mercury and cyanide in mining activities, to understand the extent and the depth of the problems associated with industrial mining [6]
The results of the water samples were compared with the [7] guideline value (6 μg/L) for mercury and (70 μg/L) for cyanide for drinking water and that of sediments samples were compared to the [17] guideline value (0.2 mg/kg for mercury and 0.07 mg/kg for cyanide)
Summary
Extractive industries are essential for the development of national economies. The mining sector plays an important role in the growth of many countries around the world and continues to make an important contribution to national and regional economies [1]. Are toxic metals, recognized nowadays significant and harmful pollutants for man and the environment [2]. They are naturally present in water but at very low concentrations [3]. Recent studies have shown that the amount of mercury in water has increased since the industrial age [5]. It is important to study the levels of mercury and cyanide the sites of industrial min. The knowledge of the levels of mercury and cyanide will inform corrective measures to take before this water is used for any purpose. The objective of this study is to determine the levels of total mercury and cyanide in the rivers, streams, sediments and drillings.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
