Abstract
The application of TiO2-based devices is mainly dependent on their crystalline structure, morphology, size, and exposed facets. Two kinds of TiO2 with different structures, namely TiO2 pompons and TiO2 nanotubes, have been prepared by the hydrothermal method. TiO2 with different structures is characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Brunauer—Emmett—Teller (BET) surface area analysis. Solar cells based on poly(3-hexylthiophene) (P3HT) and TiO2 with different structures are fabricated. In the device ITO/TiO2/P3HT/Au, the P3HT is designed to act as the electron donor, and TiO2 pompons and TiO2 nanotubes act as the electron acceptor. The effects of the TiO2 structure on the performance of hybrid heterojunction solar cells are investigated. The device with TiO2 pompons has an open circuit voltage (Voc) of 0.51 V, a short circuit current (Jsc) of 0.21 mA/cm2, and a fill factor (FF) of 28.3%. Another device with TiO2 nanotubes has a Voc of 0.5 V, Jsc of 0.27 mA/cm2, and FF of 28.4%. The results indicate that the TiO2 nanotubes with a unidimensional structure have better carrier transport and light absorption properties than TiO2 pompons. Consequently, the solar cell based on TiO2 nanotubes has a better performance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
