Application of PCM Energy Storage in Combination with Night Ventilation for Space Cooling

Abstract

Night ventilation was tested in combination with PCM-impregnated gypsum boards. The Price-based method was experimentally used to perform peak load shifting.Importance of the application of a smart control was experimentally investigated.A cost and energy saving up to 93% and 92% per day, respectively, were achieved. In recent years, as a result of the continuous increase in energy demand, the use of energy storage has become increasingly important. To address this problem, the application of phase change materials (PCMs) in buildings has received attention because of their high energy storage density and their ease of incorporation in building envelopes. Despite large experimental works conducted on the application PCMs in buildings, there is very little work done on this application in combination with night ventilation. In this study, the application of night ventilation in combination with PCM-impregnated gypsum boards for cooling purposes was experimentally investigated. Two identical test huts equipped with “smart” control systems were used for testing the concept. One hut was constructed using impregnated gypsum boards, while the other hut was finished with ordinary gypsum board. Initially an air-conditioning (AC) unit, without night ventilation, was used in both huts to charge the PCM during low peak period, showing very little savings in electricity. However, when night ventilation was used to charge the PCM instead, a weekly electricity saving of 73% was achieved.