Abstract
In the iron and steel making shops, some processes are so complex that it is difficult to formulate precise control models. In such cases, process control is made on the basis of the skilled operator's heuristic knowledge. However, utilization of skilled operator's heuristic knowledge is one of the major problems to control the process precisely. In the fuzzy set theory, skilled operator's knowledge is expressed as membership functions to control the process as well as skilled operators.The fuzzy set theory was applied to the on-line control of return fine hopper level at the sintering plant in Fukuyama Works, Nippon Kokan K.K. This was the first application of fuzzy control to the practical operation. The commercial operation has started in August 1986. As the result, the deviation of return fine hopper level decreased from 12 to 4%/h and the amount of return fine decreased by about 2kg/t-sinter.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transactions of the Iron and Steel Institute of Japan
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
