Abstract
As an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. Using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. Corrosion resistance was studied in 3.5 wt.% NaCl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface methods. The coated samples revealed a considerable decrease in corrosion rate and with increasing immersion time up to 1200 s, the coating resistance increased. Electrochemical impedance data showed that the aluminum charge transfer resistance was increased in the existence of cerium oxide conversion coatings. Using energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM), the chemical composition and surface morphology were also evaluated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Iranian Journal of Oil and Gas Science and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
