Anion exchange method for the sequential determination of uranium, thorium and lead-210 in coal and coal ash

Abstract

A radiochemical procedure is presented for the sequential determination of uranium isotopes, thorium isotopes, and210Pb in coal and coal ash. This procedure consists of dry ashing the sample, a nitric—hydrofluoric acid dissolution, removal of iron with ether extractions, and separation of the elements of interest by anion exchange chromatography. Uranium and thorium isotopes are measured by alpha spectrometry, while210Pb is measured by beta counting its daugther activity,210Bi. For 10 g coal samples and 1 g ash samples, the chemical yields for the radioactivities measured were 70–80%, and the relative standard deviations for replicate analyses were generally less than 9%. The deviations of the means from the reference values were within the combined errors of each and were usually less than ±5%. Minimum detectable activities were about 0.02 pCi for uranium and thorium isotopes and 0.2 pCi for210Pb.