Abstract
Abstract Vortex pumps are usually designed based on its inner flow model. Currently, the flow models of vortex pump just consider flow rate at the design condition, which results in low efficiency under off-design flow rates in practical engineering. Therefore, the main objective of this article is to build a flow model that takes into account the impact of flow rates. To reveal the flow mechanism of vortex pump, we provide refined flow field simulations for a vortex pump. Performance experiments were conducted to validate the numerical simulation method. The study found that the vortex structure in the non-blade cavity can be regarded as a Rankine-like vortex. The inflow range is limited to the hub diameter (45 mm), smaller than the volute inlet diameter (85 mm). The action radius of the forced vortex gradually decreases from the impeller side to the inlet side. The maximum radius of the forced vortex on the impeller side is determined by the impeller diameter. As the flow rate increases, the action radius of the forced vortex on the inlet side gradually increases, while the axial length of the vortex in the inlet pipe gradually decreases. Based on the study of internal flow, a new flow model is proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
