Abstract
Nowadays, real-time bridge deformation monitoring has attracted more attention due to the development of bridge management system and land transportation safety. Huge civil engineering structures, such as long-span bridge, is susceptible to dynamic deflection caused by various loadings. Hence, precise dynamic response measurement becomes necessary to make structure more reliable and integrated. Currently, Global Navigation Satellite System (GNSS) positioning technology has been commonly used in this field to detect the dynamic displacement of long-span bridges. According to this, real-time data were collected from the Forth Road Bridge to observe the dynamic response of lang span bridges under extreme wind load conditions and this report has also verified the data processing technique of the real-time bridge deformation monitoring system. Compared with other monitoring methods, the method used in this report which combines GNSS and anemometer together has features of high frequency with low lag. Moreover, it also shows the superiority of post-processing and synchronization, background noises could be reduced by embedded software. Finally, according to the cross-correlation analysis, it was found that wind speed and bridge displacement in y-axis have the highest correlation. Also, the reliability of combining method to monitor the dynamic response of long-span bridge and noise reducing method proposed in this report has also been verified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.