Abstract
AbstractPlain weave planar and biaxially braided tubular SiC/SiC CMCs are evaluated in tension and four‐point bending, respectively, at ambient conditions. Custom‐designed fixtures for CMC testing are developed for each loading mode and are coupled with three‐dimensional digital image correlation. Stereoscopic image correlation analysis reveals crack initiation and failure sites to provide insight into stress redistribution mechanisms. Scanning electron microscopy is performed postmortem to determine the influence of microstructural features on crack initiation and failure. Crack spacing is measured in situ by stereoscopic image correlation and confirmed by SEM measurements to relate to underlying tow‐tow crossing points. Triangulated surface heights of plain weave tow architecture are used to determine that subtle differences in neighboring transverse tow angle, which vary within a range of ±4° from horizontal, have no significant effect on final fracture location. The results presented reaffirm the state of current SiC/SiC CMCs developed for energy applications and will help to further improve SiC/SiC and other CMCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
