Abstract
The aim of the study was to analyze the properties of foamed bitumen produced from 50/70 bitumen in terms of the assessment of its usefulness to the road construction materials. In order to improve the foaming parameters the synthetic wax Fischer-Tropsch (FT) in an amount of 1.0%, 2.0% and 3.0% was used. Bitumen binder parameters were evaluated before and after the foaming process. The basic parameters were evaluated (before the foaming process): penetration, Fraass breaking point and softening point. The bitumen foam parameters were measured at the foaming water content (FWC) in the range from 1.5% to 4.0% with an increment of 0.5%. The tests allowed determining optimal application ranges for the FT and the FWC to produce asphalt at lower temperatures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.