Abstract
Electroencephalography (EEG) is a sensitive and weak biosignal that varies from person to person. It is easily affected by noise and artifacts. Hence, maintaining the signal integrity to design an EEG acquisition system is crucial. This article proposes an analog design for acquiring EEG signals. The proposed design consists of eight blocks: (1) a radio-frequency interference filter and electro-static discharge protection, (2) a preamplifier and second-order high-pass filter with feedback topology and an unblocking mechanism, (3) a driven right leg circuit, (4) two-stage main and variable amplifiers, (5) an eight-order anti-aliasing filter, (6) a six-order 50-Hz notch filter (optional), (7) an opto-isolator circuit, and (8) an isolated power supply. The maximum gain of the design is approximately 94 dB, and its bandwidth ranges from approximately 0.18 to 120 Hz. The depth of the 50-Hz notch filter is -35 dB. Using this filter is optional because it causes EEG integrity problems in frequencies ranging from 40 to 60 Hz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
