Abstract
Low-frequency resonance may seriously threaten the stable operation of a long-distance ultra-high-voltage-direct-current (UHVDC) system. In this paper, the impedance model of long-distance UHVDC systems was analyzed for various disturbances. For different disturbances, the positions of voltage sources in the simulated DC loop are different. Taking the first ±1100-kV DC power transmission project with a length of 2688km as an example, the frequency characteristics of the DC-loop impedance were studied using the PSCAD/EMTDC simulation platform. The effects of various operating modes and the firing angle of the converters on impedance–frequency characteristics of the DC loop were discussed. The effect of the length of DC transmission lines on the DC-loop resonant frequency was studied. The distance is the most important factor determining the system low-frequency resonance. Faults in an AC grid, such as phase-to-phase short-circuit and single-phase faults, are shown to produce 50-Hz positive sequence harmonics on the AC side and 100-Hz disturbances in the DC loop. Two methods of mitigating low-frequency resonance were proposed and the effects simulated. Installation of the blocking filter in the neutral bus of the converter station can reduce the amplitude of the resonance overvoltage.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
