Abstract
The aim of this study is to determine the influence of the biogas purification process with activated carbon as an adsorbent on the flame temperature and the color of the biogas flame from cow dung. In this study, several biogas purification technologies were developed using various methods using adsorbent technology. In this study, a biogas purification was performed using 60 mesh activated carbon with a volume volume of 1.5 liters of activated carbon and a gas flow rate of 1580 l / s, varying 3 adsorbent tubes of different tube sizes. The results showed that the biogas purification in pipe III had a high and good temperature, flame height and flame color with differences in pipe I, pipe II and without cleaning, ie the flame temperature of 701 ° C, flame height 66.4735 mm and the color of the produced Flame is light blue, the quality of the produced biogas is very good. Thus it can be concluded that the comparison of the biogas purification in pipe III has a flame temperature and flame height and flame color which is more optimal than the biogas purification in pipe I, pipe II and without cleaning.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
