Abstract
Nano-tungsten carbide (WC-12Co) can improve the wear resistance and hardness of the surface. The aim of this paper is to characterize the wear in WC-12Co coating on the surface of FS438 die steel using electro-spark deposition (ESD). A sliding contact experiment was conducted on a friction and wear tester using GCr15 bearing steel as friction pair. The wear loss of the coating was measured, and the wear coefficient is calculated, and a finite element model was used with the Umeshmotion subroutine to estimate the wear depth and contact stress. The results showed that the wear loss increases with the increase of the load, and the friction coefficient and the wear coefficient decrease with the increase of the speed. The simulation results showed the inner and outer contact stresses are greater than those in the central position, and the wear trend of the disc is consistent with the contact stress change trend. The wear depth in WC-12Co was numerically simulated to an acceptable accuracy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.