Abstract
Sewage sludge, mine tailing and dredged sediment, as well as wastewater rich in heavy metal, pose threats to biota life and their treatments are thorny issues. A novel strategy using Cr-contaminated sediment to treat wastewater containing heavy metals is proposed in this study. The Cr-contaminated sediment (Cr-CS) is used to remove hexavalent chromium (Cr(VI)) from wastewater. Experimental results show that the background Cr concentration in the sediment has little influence on the removal efficiency of total Cr under the examined conditions (300–1,000mgkg−1). The existence of organic matter favors the reduction of Cr(VI), but has limited effect on the removal of Cr(III). The total Cr removal process involves reduction, adsorption and precipitation, and is highly pH-dependent. The optimum pH values for Cr(VI) reduction and Cr(III) removal are determined as 1.0 and 4.0, respectively. The removal efficiency of total Cr under optimum conditions reaches 95.8%. The results also suggested co-existent heavy metals (Cd, Cu, Pb, and Ni) were hard to release to the water under experimental conditions (i.e., the release amounts are ranged from 0.0035 to 0.055mgL−1 for Cd, Cu, Pb, and Ni, respectively, which can achieve the comprehensive sewage discharge standard). This work demonstrated that use of some heavy-metal-contaminated sediments to treat wastewater containing the same heavy metal could be a feasible approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.