An Independent Evaluation of GHGSat Methane Emissions: Performance Assessment

Abstract

AbstractAn independent evaluation of methane emissions data from GHGSat, a private company that operates a constellation of small microsatellites flying Fabry‐Perot spectrometers operating at 1.6 µm, was performed. Data from multiple GHGSat commercial satellites, consisting of retrieved methane, diagnostics, and, where detected, plume and emissions information from roughly 250 scenes across Canada were analyzed. From these, 10 scenes contained methane plumes with a 2% detection rate for oil and gas scenes, and 10% for landfills. Methane precision was found to be 5%/2% on average for the C1/C2–C5 designs, with some variability due to scene albedo, terrain roughness, and airmass. Synthetic GHGSat plumes, generated using Lagrangian plume dispersion model and GHGSat characteristics, indicates typical detection limits of 240/180 kg/hr(C1/C2–C5), with a best case of roughly 100 kg/hr. Emissions and their uncertainties calculated using an alternative approach were in broad agreement with GHGSat‐reported emissions. Overall, the performance of the GHGSat C2 design (also used for C3 onward) for favorable‐viewing conditions was found to be largely consistent with company‐advertised performance.