An experimental study on the mechanism of degradable fiber-assisted diverting fracturing and its influencing factors

Abstract

Fiber-laden fluid systems have been successfully applied for reorientation fracturing in tight gas and shale gas reservoirs around the world. Although many successful cases have been reported in the literature, there is a lack of a deep understanding of the mechanical mechanism of fiber-assisted diverting fracturing. Hence, this paper presents a systematic study of the fracture diversion mechanisms of the fiber-diverting fracturing technique. A series of laboratory experiments is conducted with a real tri-axial stress simulation system. Degradable fibers are applied to large-size natural outcrop samples (300 mm × 300 mm × 300 mm) under true triaxial stress conditions. The dynamic filtration experiment to test the temporary plugging ability showed that the fractures were effectively plugged by fiber fluids. A variety of factors related to the fracture reorientation are tested and compared, including injection rate, fracture width and horizontal principal stress difference. The additional pressure drop caused by the fiber filtration cake is calculated and used to quantitatively analyze the effects on fracture reorientation. The net pressure increase is the driving force of the fracture diversion and formation of the fracture network. The conclusions were used to guide carbonate reservoir stimulations in the Tarim oil field, in northwest China. The phenomenon of fracture diversion was evident as the pumping pressure increased considerably after injecting the degradable fiber. The hydraulic fracturing treatment and production results showed substantial pressure responses and excellent hydrocarbon production.