An experimental investigation into modeling solids friction for fluidized dense-phase pneumatic transport of powders

Abstract

Results are presented of an ongoing investigation into modeling friction in fluidized dense-phase pneumatic transport of bulk solids. Many popular modeling methods of the solids friction use the dimensionless solids loading ratio and Froude number. When evaluated under proper scale-up conditions of pipe diameter and length, many of these models have resulted in significant inaccuracy. A technique for modeling solids friction has been developed using a new combination of dimensionless numbers, volumetric loading ratio and the ratio of particle free settling velocity to superficial conveying air velocity, to replace the solids loading ratio and Froude number. The models developed using the new formalism were evaluated for accuracy and stability under significant scale-up conditions for four different products conveyed through four different test rigs (subject to diameter and length scale-up conditions). The new model considerably improves predictions compared with those obtained using the existing model, especially in the dense-phase region. Whereas the latter yields absolute average relative errors varying between 10% and 86%, the former yielded results with errors from 4% to 20% for a wide range of scale-up conditions. This represents a more reliable and narrower range of prediction that is suitable for industrial scale-up requirements.